仕様 |
Voltage range |
12V DC to 29V DC |
Display LCD size |
64.6mm (2.54”) x 55.6mm (2.19”) |
Maximum current |
12Amps |
Warning alarm |
High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit |
Targeted(set)
temperatures
|
Singular degrees from:
40°C (104°F) to 110°C (230°F) |
Memory |
Set & targeted temperature |
Fan cut-in temp. |
3°C (5.4°F) above the targeted (set) temperature |
Controller type |
PCB with micro-processor |
Sensor type |
Thermister in housing |
Overrun/shutdown |
-10°C (14°F) below set/target temperature or 3 minutes |
Indicators |
Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm) |
Weight |
135g |
Dimensions |
Length = 95mm (3.7")
Width = 130mm (5.1")
Depth = 25mm (1”)
|
This LCD EWP® / Fan Digital Controller (Part #8001) is Australian designed and as part of this Australian manufacturing company’s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.
The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP® by varying the speed of the EWP® in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 60°C (140°F) to 100°C (212°F).
Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP® to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.
Features
Black & White Numerical Screen
Celsius or Fahrenheit display option
Warning Alarms:
- Plus 10°C (14°F) set/target temperature
- Under temp 40°C after 5 mins
- Temp sensor error
- Over or under voltage
- EWP error
Select any set temp range from 60°C (140°F)to 100°C (212°F)
Set / targeted temperature memory
Override feature to assist bleeding EWP & fail safe
Input voltage display
Compatible with billeted style Electric Water Pumps